ACU-RITE CNC 3500i - Manual (Page 222)

196 7 Programming: Canned Cycles, sub-programs
7.
2 Canned Cy
cles
 G-code format: G190
Field Code Description
XStart X X coordinate for lower-left corner of the first
character. Defaults to current position if not
given. (Optional)
YStart Y Y coordinate for lower-left corner of the first
character. Defaults to current position if not
given. (Optional)
Angle C Angle in degrees. Default is 0 degrees.
(Optional)
MirrorX U Mirrors all X moves. Set by selecting "Yes"
in this field. (Optional)
MirrorY V Mirrors all Y moves. Set by selecting "Yes"
in this field. (Optional)
Feed F Feedrate used while engraving. Default is
current feedrate. (Optional)