ACU-RITE CNC 3500i - Manual (Page 277)

ACU-RITE 3500i 251
7.
4 Sub-pr
ogr
ams
Pocket/Island example 6
Example 6 shows a more complex contour with three islands one of
which is nested. This will also use the coarse tool feature. Stock will
be left to be removed with a finish cycle. The initial roughing tool has
a 1” diameter. A roughing finer tool with 1/4” radius will be used for
further roughing. Finally, a finish tool is also specified. The structure of
the program is similar to the previous examples.