ACU-RITE CNC 3500i - Manual (Page 175)

ACU-RITE 3500i 149
7.
2
C
a
n
n
e
d
C
y
c
le
s
7.2 Canned Cycles
Canned Cycles
A canned cycle is a preset sequence of events initiated by a single
block of data. Canned cycles are part of the CNC software and cannot
be altered. They simplify the programming of complicated cycles. One
block of data can instruct the CNC to perform the necessary moves to
drill a hole, or mill a pocket.
A canned cycle is in Conversational format, and G-Code. The
Conversational format describe parameters, such as peck distance,
retract height, pocket depth, and tool stepover. Each canned cycle has
its own conversational format.
The Conversational format in a canned cycle allow you to customize
the cycle to include the necessary dimensions, feedrates, etc.
Canned cycles greatly reduce program blocks. Use them whenever
applicable.
Canned cycles are usually entered into the part program from the
Program Edit/Help Menu. Refer to chapter 11 "Activating Edit Help" on
page 372 for G-code format. Conversational format contains graphics,
and labeled entry fields to make programming canned cycles quick
and easy.