ACU-RITE CNC 3500i - Manual (Page 326)

300 10 CAM: Programming
1
0
.1 CAM Pr
ogr
a
mming
Pattern tab:
The Pattern tab must have the appropriate data filled in to use the
Pattern option in the Drill Location selection.
 # X Holes: Enter the number of holes in X-axis.
 # Y Holes: Enter the number of holes in Y-axis.
 Style: Choose to use matrix pattern or perimeter pattern.
 X Start: Enter the start position in the X-axis.
 Y Start: Enter the start position in the Y-axis.
 Y Increment: Enter the increment between holes in X-axis.
 X Increment: Enter the increment between holes in Y-axis.
 Angle: Enter the angle to rotate the hole pattern.
Comment tab:
 To add a comment if needed that will be placed in program to assist
the operator. Typical to most dialogues.