ACU-RITE CNC 3500i - Manual (Page 181)

ACU-RITE 3500i 155
7.
2
C
a
n
n
e
d
C
y
c
le
s
Flat Bottom Boring Cycle
 This boring cycle generally used to program a pass in each direction
with a dwell at the bottom. The tool feeds from the R-plane to Z
depth, dwells for specified time, then feeds to the retract (P)
dimension.
 G-code format: G89
Field Code Description
ZDepth Z Absolute hole depth. (Required)
Dwell D Dwell time (in seconds). (Required)
StartHgt R Initial Z start point, in rapid. (Required)
ReturnHgt P Z return point after hole depth, in rapid.
Feed F Feedrate