ACU-RITE CNC 3500i User Manual
Page 213
ACU-RITE 3500i
187
7.
2
C
a
n
n
e
d
C
y
c
le
s
G-code format: G210
Field
Code
Description
FinStock
S
Amount of stock left by the roughing
passes for a finish pass. This amount
applies to the sides and bottom unless R
(SideStock) is defined; then, S (FinStock)
only applies to the bottom. Default is no
stock left.
SideStock
R
Amount of stock left by the roughing
passes for a finish pass on the sides only.
This amount overrides the value in S
(FinStock). A value of zero can force stock
to be left only on the bottom. Default is
equal to S (FinStock).
ZFeed
I
The feedrate at which the tool will "ramp"
into the slot in all three axes. Default is last
programmed feedrate.
Rough
Feed
J
Feedrate used during roughing passes.
Default is last programmed feedrate.
FinFeed
K
Feedrate used during finish passes. Default
is last programmed feedrate.
RetractHgt
P
Z-axis absolute start and finish height (must
be equal to or above "H"), used as a safety/
clearance Z position before making X/Y
moves. Executed in rapid at start and end of
cycle. Defaults to current Z position at
beginning of cycle.
Coarse
Tool
T
Number of tool used for previous roughing
cycle.
SkipRough
E
Yes = Roughing pass is skipped, only finish
pass is performed.
No = Roughing pass is performed. (Default)
SkipFinish
F
Yes = Finish pass is skipped, only rough
pass is performed.
No = Finish pass is performed. (Default)
Direction
Q
Select Cw or Ccw.