ACU-RITE CNC 3500i - Manual (Page 365)

ACU-RITE 3500i 339
1
0
.1 CAM Pr
ogr
a
mming
 Select the Pocket Cycle button from the Vertical
button bar to open the Pocket Cycle Form dialogue.
 Step Over: Enter 0.090.
 Start Height: Enter 0.100.
 Z Depth -0.375.
 Touch Use button.
 Select the shape by clicking on any part of the geometry that makes
up the shape (e.g. one of the outside arcs).
 Verify Tool Path graphic, and touch Yes to accept.