ACU-RITE CNC 3500i - Manual (Page 370)

344 10 CAM: Programming
1
0
.1 CAM Pr
ogr
a
mming
 The screen now has three circles, and one tangent line on the two
smaller circles.
Finalizing the geometry
 Unwanted geometry now needs to be trimmed from the final shape.
Select the Trim button from the Modifying Toolbar.
 Select the Trim button from the Modifying Toolbar in
the main Toolbar.
 The Prompt bar will ask that the objects to be trimmed should be
selected. Select the two smaller circles.
 The Prompt bar will ask what geometry the objects should be
trimmed against. Select the large circle, and the line.
 The Prompt bar will ask what objects to keep. Select the two
outside radius arcs of the smaller circles.
 Now touch in an open area in the display. Both inside radius will be
removed.