ACU-RITE CNC 3500i - Manual (Page 330)

304 10 CAM: Programming
1
0
.1 CAM Pr
ogr
a
mming
 Spindle Speed: Enter the spindle speed.
 Coarse Tool: Enter the number of the tool used for the previous
roughing pass.
 Skip Rough?: Skip rough pass.
 Skip Finish?: Skip finish pass.
 Finish Dir: Direction of the finish pass (CW or CCW).
Comment Tab:
 Add a comment if needed that will be placed in program. See
sample "Comment tab:" on page 300.