ACU-RITE CNC 3500i - Manual (Page 266)

240 7 Programming: Canned Cycles, sub-programs
7.
4 Sub-pr
ogr
a
ms Field Code Description
ZCenter K Z-Axis coordinate for the point of rotation,
the point about which rotation occurs.
PivotPoint E Specify YES to use the defined rotation
center point as a pivoting point for the
rotation.
Specify NO to use the defined center point
as strictly a point to rotate about.
Default is YES.
MirrorX U Specify YES to mirror the sub-program
pattern and movements across the X-Axis.
MirrorY V Specify YES to mirror the sub-program
pattern and movements across the Y-Axis.
MirrorZ W Specify YES to mirror the sub-program
pattern and movements across the Z-Axis.
XScale X X-Axis scale factor. Multiplies all X-Axis
positions by the number specified.
YScale Y Y-Axis scale factor. Multiplies all Y-Axis
positions by the number specified.
ZScale Z Z-Axis scale factor. Multiplies all Z-Axis
positions by the number specified.