Avaya Cajun P882 User Manual

Page 70

2-4

Chapter 2

Cajun P550/P880/P882 Switch User Guide

Contains software developed by:

Epilogue Technology Corporation

TEC Technically Elite Concepts, Inc.,

Hermosa Beach, California, U.S.A.

ISI Integrated Systems, Inc.

All other trademarks used herein are the property of their

respective owners.

Lucent Technologies Cajun Switch Agent v4.0.0

Press Ctrl-P for previous command, Ctrl-N for next command,?

for help.

* Note: Login information and Password prompts are case

sensitive.

4. Enter root at the Login prompt. The password prompt

displays.

5. Enter root at the Password prompt. The command line

interface prompt displays. You must now change he
command mode to the configure mode so that you can use
the

setup

command.

6. Complete the following steps to change the command mode

to the configure mode:

a. Enter the

enable

command.

b. Enter the

configure

command

7. Enter the

setup

command

This initiates a series of queries.

Answer each query as follows:

a. Press Enter when prompted to change the super user

password. This accepts the default of Yes

b. Enter your old password. The system then prompts you

for a new password.

c. Enter your new password, then re-enter the new

password to verify your choice.

d. Enter the IP address for the switch manager’s Ethernet

console.

e. Enter the subnet mask.

f. Enter the default gateway for the switch.