Avaya Cajun P882 - Manual (Page 407)

Cajun P550/P880/P882 Switch Configuration Guide
Configuring AppleTalk Routing
15-15
3. Refer to Table 15-3 to configure the Add AppleTalk NBP
filter dialog box.
4. Click CREATE to add your new static route, or CANCEL to
restore previous settings.
Creating a NBP
Filter Using the
CLI To create an NBP filter using the CLI, enter the following command
from Configure mode:
> (config-if :)# appletalk
access-list
nbp
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Table 15-3. AppleTalk NBP Filter Parameters
Parameter Definition
Access List Enter the access list number to be associated with the
NBP filter. Valid values are 600-631.
Name Enter the name of the NBP name object to be filtered.
Type Select the type of filtering. The options include:
• Deny
• Permit
Note: You can also leave this field blank for
wildcarding:
Interface Select the interface(s) to apply this filter to.