Avaya Cajun P882 - Manual (Page 357)

Cajun P550/P880/P882 Switch User Guide
Configuring IPX Routing
12-11
Creating IPX
Static Routes
Using the CLI To create IPX static routes using the CLI, enter the following
command in Interface mode:
cajun(configure if-: ipx route
address|range>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Deleting IPX Static Routes
You can delete an IPX static route using either the web agent or the
CLI.
Deleting IPX
Static Routes
Using the Web
Agent To delete an IPX static route using the web agent:
1. Select Static Routes from the Routing > IPX > Configuration
group on the web agent window. The IPX Static Routes
dialog box opens (see Figure 12-5).
2. Select the checkbox for the IPX static route that you want to
delete from the Select column.
3. Click DELETE to remove the IPX static route, or CANCEL to
restore the IPX static route.
Deleting IPX
Static Routes
Using the CLI To delete an IPX static route using the CLI, enter the following
command from Configure mode:
cajun(configure)# clear ipx route {
default|*}
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.