Avaya Cajun P882 - Manual (Page 67)

Cajun P550/P880/P882 Switch User Guide 2-1
2 Initialize and Setup of the
P550/P880/P882 Switch
Overview
The following information and procedures are provided in this
chapter and are common to both layer 2 and layer 3 module
configuration:
■
Setting Up Your Laptop or PC Monitor
■
Configuring the Supervisor Module Using the CLI
■
Configuring the Switch Using the Web Agent
■
Changing the Console Serial Port Settings
■
Configuring Dial-Up Networking
■
Managing Configuration Files
* Note: The last step in each procedure tells you to click Apply
to save any setup or changes you made. This saves the
setup or any changes to the Running config only. The
Startup config has not changed. Therefore, these and
other changes will be lost if your switch goes down or if
you power it off.
To save these changes to the Startup Config, you must
copy the Running config to the Startup config.
Refer to the "Copying Configuration Files" section later
in this chapter.