Avaya Cajun P882 - Manual (Page 381)

Cajun P550/P880/P882 Switch User Guide
Configuring IPX SAP Protocol
14-3
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Configuring IPX
SAP Interfaces
Using the CLI To configure the IPX SAP interfaces using the CLI, enter the
following command from Interface mode:
cajun(conf-if ):# ipx sap
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Triggered Updates Select one of the following from the pull-down
menu:
• Disable – To prevent SAP updates from
being immediately transmitted to the
network in response to changes in the
network topology
• Enable – To allow SAP updates to be
immediately transmitted to the network in
response to changes in the network topology
(default).
Get Nearest Server
Reply Select one of the following from the pull-down
menu:
• Disable – To prevent the router from
responding to Get Nearest Server requests
received on the interface
• Enable – To allow the router to respond to
Get Nearest Server requests received on
the interface (default).
Get Nearest Server
Reply Delay Specify the delay (in msecs) to wait before
responding to a Get Nearest Service request
received on the interface.
Mode Select one of the following from the pull-down
menu:
• Talk/Listen - Send and receive
advertisements (default).
• Talk Only - Send advertisements.
• Listen Only - Receive advertisements.
Table 14-1. IPX SAP Interface Dialog Box Parameters continued
Parameter Allows you to...