Avaya Cajun P882 - Manual (Page 447)

Cajun P550/P880/P882 Switch User Guide
Managing Intelligent Multicasting
16-21
3. Click ...:
—
APPLY to save your changes.
—
CANCEL to restore previous settings.
—
CLEAR to clear the statistics.
—
REFRESH to refresh the contents of the table.
Configuring
IGMP Snooping
Using the CLI To configure IGMP snooping using the CLI, enter the following
command from Configure mode:
cajun(configure)# set igmp-snooping enable
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring the Lucent Group Management
Protocol (LGMP) Server
The section provides the following procedures:
■
Enabling the LGMP Server
■
Configuring the LGMP Server
■
Modifying the LGMP Server Display per VLAN
■
Modifying LGMP Clients Per VLAN
Enabling the LGMP Server
You can enable the LGMP server using either the web agent or the
CLI.