Avaya Cajun P882 - Manual (Page 351)

Cajun P550/P880/P882 Switch User Guide
Configuring IPX Routing
12-5
2. Configure IPX Routing Global Configuration dialog box
parameters to make your switch an IPX router. Refer to Table
Table 12-2 for an explanation of the dialog box parameters.
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Configuring IPX
Routing
Globally Using
the CLI To configure IPX routing globally using the CLI, enter the following
command from Configure mode:
cajun(configure)# ipx rip
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Table 12-2. IPX Routing Global Configuration Dialog Box Parameters
Parameter Allows you to ...
IPX Routing Select Disable to prevent IPX from routing globally. The
default value is Enable.
Use Default
Route Select Enable if you know the default route. The default
value is Disable.
RIP Select Disable to prevent IPX RIP from routing globally.
This affects all IPX interfaces set up to use the IPX RIP
routing protocol. The default value is Enable.
SAP Select Disable to prevent IPX SAP from routing globally.
This affects all IPX interfaces set up to use the IPX SAP
routing protocol. The default value is Enable.
Maximum
Number of
Routes Enter the maximum number of routes that can be added
to the routing table. The switch rounds your entry to the
nearest power of 2. For example, if you enter 1000, the
system rounds this number up to 1024 routes. The default
value is 2048.
Maximum
Number of
Services Enter the maximum number of services that can be added.
The switch rounds your entry to the nearest power of 2.
For example, if you enter 1000, the system rounds this
number up to 1024 services. The default value is 2048.