Avaya Cajun P882 - Manual (Page 315)

Cajun P550/P880/P882 Switch User Guide
Configuring the Routing Information Protocol (RIP)
10-5
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Modifying RIP
Interfaces Using
the CLI To modify RIP interfaces using the CLI enter the following command
from Configure mode:
> (configure)# route rip
> (configure router rip)# interface
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Default
Route Specify the mode for the default route. Different
states include:
• Disable - Disables the default route.
• Talk Only - Send RIP information to the
network.
• Listen Only - Receive RIP information from
the network.
• Talk/Listen - Both send and receive RIP
information from the network.
Auth Type Specify the type of authentication available for use on
a given RIP interface. Authentication types include:
• None - No authentication available.
• Simple - Uses a clear-text password for
validation.
• MD5 - Uses a stronger encryption technique for
passwords.
Auth Key Enter the authorization key value.
Table 10-2. RIP Interface Dialog Box Parameters continued
Parameter Allows you to...