Allied Telesis AT-WA7501 User Manual
Page 93

AT-7500 and AT-WA7501 Installation and User’s Guide
93
For this example, set these filter expressions.
Table 11. Example 1 – Filter Expressions
Parameter
Value
Explanation
ExprSeq
10
The order that you want the expressions
executed. You must have an expression
for each Value ID that is listed in the Filter
Values menu.
Offset
0
Since the filter is applied to the destination
address, which is the first value in the
frame, the offset is 0.
Mask
ff ff ff ff ff ff
Compares the entire 6-byte destination
address for an exact match.
Op
EQ
Compares the value after the offset and
mask are applied to the value of the Value
ID from the Filter Values menu to see if
they are equal. (If the value at the offset
equals the specified value on the Filter
Values menu, the frame is multicast.)
Value ID
1
This filter expression applies to value ID 1
from the Filter Values menu.
Action
Pass
If this filter expression is true, continue to
the next expression.