Allied Telesis AT-WA7501 - Manual (Page 190)

Chapter 6: Configuring Security
190
To configure a VLAN
1. From the main menu, click Spanning Tree Settings. The Spanning
Tree Settings screen appears.
2. Check or clear the Enable GVRP for VLAN check box:.
ˆ Check the check box if the VLAN switch is configured to
dynamically configure its ports based on the end devices’ needs.
ˆ Clear the check box if the VLAN switch is statically configured to
always forward specific VLANs to specific ports.
3. Click Submit Changes to save your changes.
4. From the main menu, click Security. If you have enabled more than the
primary service set, you can configure each secondary service set for
a different VLAN.