Allied Telesis AT-WA7501 - Manual (Page 243)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
243
2. Click the Find This Access Point button. The access point LEDs start
blinking, as shown in the next table.
LED On
LED Off
LED Flashing
3. The LEDs continue to blink until you click the Finished Finding Access
Point button.
Restoring the
Access Point to
the Default
Configuration
You may need to restore the access point to the factory default
configuration. For a list of the default settings, see Appendix B, “Default
Settings.” To restore the access point to the default configuration, you can
use the Web browser interface, as explained in the following procedure:
1. In the menu bar, click Save/Discard Changes.
Table 7. Find This Access Point
Power Wireless
#1 Wireless
#2 Wired LAN Root/Error