Allied Telesis AT-WA7501 - Manual (Page 34)

Chapter 1: Getting Started
34
4. Configure the spanning tree settings for the point-to-point bridge on
the secondary LAN:
a. From the main menu, click Spanning Tree Settings. The Spanning
Tree Settings screen appears.
b. In the Root Priority field, enter 0.
c. In the Secondary LAN Bridge Priority field, enter a number other
than zero.
d. In the Secondary LAN Flooding field, choose Enabled.
5. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 45.
6. Configure the master radio in the point-to-point bridge on the primary
LAN:
a. From the main menu, click the link corresponding to the master
radio. The radio screen appears.
b. Make sure the Allow Wireless Access Points field is On Primary.
c. In the Primary service set Node Type field, choose Master.
d. In the Primary service set SSID (Network Name) field, type the
SSID. In this example, the SSID is Manufacturing.
e. Click Submit Changes.