Allied Telesis AT-WA7501 - Manual (Page 24)

Chapter 1: Getting Started
24
Example - Configuring an 802.11g Access Point
Figure 7. 802.11g Access Point
Allied Telesyn recommends that you always implement some type of
security.
Using Multiple
Access Points and
Roaming
Wireless End
Devices
For larger or more complex environments, you can install multiple access
points so wireless end devices can roam from one access point to
another. Multiple access points establish coverage areas or cells similar to
those of a cellular telephone network. End devices can connect with any
access point that is within range and belongs to the same wireless
network.
Table 5. 802.11g Access Point Parameter Settings
Screen Parameter Access Point
802.11g Radio Node Type Master
SSID (Network
Name) Manufacturing
Spanning Tree
Settings Root Priority 5
Ethernet Bridging
Enabled Checked
Ethernet
Access
point
Host