Allied Telesis AT-WA7501 - Manual (Page 251)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
251
LED On
LED Off
LED Flashing
After the AT-WA7500 or AT-WA7501 successfully boots, the LEDs display
one of these patterns:
Only Boot ROM
code is
available on
access point.
Load new files.
(Wireless #1 and #2 blink
in unison.)
Table 9. MobileLAN access LED Boot Sequence for Release 2.2 (or later) (Continued)
Table 10. AT-WA7500 and AT-WA7501 Normal LED Pattern After Booting
(Blinks for
wireless
data traffic.) (Blinks if a
radio is
installed.) (Blinks for
wired data
traffic.) (Blinks if the
AP
becomes
root.)