Allied Telesis AT-WA7501 - Manual (Page 247)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
247
All SSID values must be unique per
physical radio. While configuring multiple
service sets, you did not
specify a unique SSID
(network name) for each
service set. For help, see
“Configuring the 802.11g
Radio” on page 101 or
“Configuring the 802.11a
Radio” on page 119.
An entry in the RADIUS server list is using
a default secret key. Allied Telesyn
recommends that you
change the secret key from
the default for security
reasons.
At least one 802.1x supplicant protocol
must be enabled.
Matching WEP keys will merge VLAN
multicast.
No RADIUS servers have been
configured for 802.1x authentication. Click the message and
check the 802.1x check
box for at least one server
in the RADIUS Server List.
No RADIUS servers have been
configured for ACL authorization. Click the message and
check the ACL check box
for at least one server in
the RADIUS Server List.
No RADIUS servers have been
configured for login authorization. Click the message and
check the Login check box
for at least one server in
the RADIUS Server List.
The 802.1x username and password have
not been changed from their default
values.
Table 8. Alphabetized List of Configuration Error Messages (Continued)
Configuration Error Message Additional Information