Allied Telesis AT-WA7501 - Manual (Page 286)

Chapter 9: Additional Access Point Features
286
FD
Purpose:
Displays the flash file system directory, which includes information about
the boot file and file type: E (executable), D (data), and T (transparent).
Use this command to ensure that the correct version of the file is in the
active boot segment. For information about transparent files, see
“Understanding Transparent Files” on page 271.
Syntax:
FD
Example:
To display the files loaded in the flash memory segment, enter:
FD 1
Note
If the flash memory segment contains no files when you reboot the
access point, the access point enters the AP monitor and you will no
longer be able to telnet to it during this session. If this occurs, you
must access the access point through its serial port to correct the
problem.
To show the files loaded in the memory card, enter:
FD app:
FDEL
Purpose:
Deletes a particular file.
Note
When you use the FDEL command, the file is marked as invalid and
remains in the file system. To reclaim the file space, you must erase
the entire segment. Use the FE command to erase a segment.
Syntax:
FDEL f
where f is the name of the file to be deleted.