Allied Telesis AT-WA7501 - Manual (Page 23)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
23
In a simple wireless network, the access point that is connected to the
wired network serves as a transparent bridge between the wired network
and wireless end devices.
To install a simple wireless network
1. Configure the initial IP address. For help, see ““Configuring the Access
Point (Setting the IP Address)” on page 39.
2. Install the access point. For help, see Chapter 2, “Getting Started” on
page 11.
3. Configure the Ethernet network. For help, see Chapter 3, “Configuring
the Ethernet Network” on page 65.
4. Configure the radios. For help, see Chapter 4, “Configuring the
Radios” on page 99.
5. Decide what level of security you want to implement in your network.
For help, see Chapter 6, “Configuring Security” on page 171.