Allied Telesis AT-WA7501 User Manual
Page 274

Chapter 9: Additional Access Point Features
274
FR
Purpose:
Finds the first executable file in the access point boot segment and tries to
run it; therefore, the first executable file in the access point boot segment
must be the boot file.
Syntax:
FR
FX
Purpose:
Downloads a file using Ymodem batch protocol into the flash segment that
is specified by s.
Syntax:
FX
s
where s is destination segment. You can use any number (1, 2, 3, or 4) to
specify the one flash memory segment on the access point.
MR
Purpose:
Displays the manufacturing record for the access point. Use the MR
command to display the MAC address, configuration string, and serial
number for your access point.
Syntax:
MR
SR
Purpose:
Sets the baud rate of the access point.
Syntax:
SR
z
where z is the baud rate. You must enter the baud rate as a whole number
with no commas. For example, to enter a baud rate of 19,200, you must
enter 19200.