Allied Telesis AT-WA7501 - Manual (Page 79)

AT-7500 and AT-WA7501 Installation and User’s Guide
79
Configuring Other Ethernet or Fiber Optic Settings
Many of the standard Ethernet or fiber optic settings are configured in the
TCP/IP Settings screen. For help, see “Configuring the TCP/IP Settings”
on page 66. In the Ethernet screen, you can set the port type, set the link
speed, and enable or disable the link status check.
To configure the Ethernet or fiber optic settings
1. From the main menu, click Ethernet. The Ethernet screen appears.
2. Configure the parameters. For help, see the next table.
3. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 45.