Allied Telesis AT-WA7501 - Manual (Page 29)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
29
6. Configure the master radio in the access point:
a. From the main menu, click the link corresponding to the master
radio. The radio screen appears.
b. Make sure the Allow Wireless Access Points field is On Primary.
c. In the Primary service set Node Type field, choose Master.
d. In the Primary service set SSID (Network Name) field, type the
SSID. In this example, the SSID is Manufacturing.
7. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 45.
8. Configure the access point to be a root access point. For help, see
“About the Primary LAN and the Root Access Point” on page 131.
9. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 45.