Allied Telesis AT-WA7501 - Manual (Page 128)

Chapter 4: Configuring the Radios
128
Allow DHCP Determines if this radio accepts DHCP frames.
The DHCP frames must match UDP destination
port 67 and ARP.
Check this check box if the end devices are
DHCP clients.
Allow All Other
Protocols Determines if this radio accepts all other
protocols that are not filtered by one of the filters
in this screen.
Multicast Filter Determines if this radio can receive and send
multicast frames.
File Name Specifies the name of the radio’s driver software.
Allied Telesyn recommends that you change this
name only when directed to do so by Allied
Telesyn Technical Support.
Hello Period Controls how frequently the access point
broadcasts hello messages on this radio port.
Hello messages help maintain the spanning tree
and serve as beacon messages to synchronize
communications with end devices.
Table 11. 802.11a Radio Inbound Filter Descriptions (Continued)
Parameter Description