Allied Telesis AT-WA7501 - Manual (Page 219)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
219
the database. You need to manually enter the password into the database,
click Submit Changes > Save/Discard Changes > Save Changes without
Reboot.
To add all entries to the database
1. Click Select All Entries. A check box appears next to all entries.
2. Click Accept Selected Entries.
To add one entry to the database
1. Check the check box next to the entry you want to add to the
database.
2. Click Accept Selected Entries.
Clearing the Rejected List
To clear the rejected list, you can either reboot the access point or perform
these steps.
1. Click Select All Entries. A check box appears next to all entries.
2. Click Clear Selected Entries.
Exporting and
Importing
Databases
Note
Allied Telesyn recommends that you use the secure web browser
interface (HTTPS) when you export and import databases.
Otherwise, the information in the databases is sent in the clear.
The EAS database is simply a comma-separated text file. You can create
the database offline (using Microsoft Excel or Notepad) and then import it.
The file must have the following format:
ACL, 11-22-33-44-55-66
TTLS, username, password
TLS, commonname
LOGIN, username, password
RADIUS, 0.0.0.0, secretkey
Note
PEAP entries are imported and exported as TTLS entries, since they
require the same parameters.