Allied Telesis AT-WA7501 - Manual (Page 38)

Chapter 1: Getting Started
38
In this example, AP3 is a dual radio access point. It may be located on a
loading dock or other remote location. During normal operations, AP3
functions as a normal access point, transmitting frames to and from the
host. However, if the Ethernet connection is disrupted, AP3 can function
as a WAP and continue operations by transmitting frames to a master
radio in AP1. AP3 must be within range of AP1.
Figure 16. Dual Radio Access Points
To install dual radio access points for redundancy
ˆ Follow the instructions for installing a simple wireless network with a
WAP on page 27.
Ethernet
AP1 AP3
Host