beautypg.com

Configuring the tcp/ip settings – Allied Telesis AT-WA7501 User Manual

Page 66

background image

Chapter 3: Configuring the Ethernet Network

66

Configuring the TCP/IP Settings

If you are using a DHCP server to automatically assign an IP address to
the access point, go to “Configuring the Access Point as a DHCP Client”
on page 68.
If you are not using a DHCP server, you need to manually
assign some TCP/IP parameters.

Note

You should have already configured an IP address for the access
point. For help, see “Configuring the Access Point (Setting the IP
Address)” on page 39
.

To configure the TCP/IP settings

1. From the menu, click TCP/IP Settings. The TCP/IP Settings screen

appears.

2. Configure the TCP/IP settings. For help, see the next table.

3. If you want to configure the access point as a DHCP server, see

“Configuring the Access Point as a DHCP Server” on page 71.

This manual is related to the following products: