Allied Telesis AT-WA7501 - Manual (Page 102)

Chapter 4: Configuring the Radios
102
If your screen does not look like the previous one, your primary service
set may be configured as station (instead of master), so that the
secondary service sets are not available, as shown next.
2. Configure the parameters for the radio. For help, see the next table.
3. Configure the advanced parameters for the radio. For help, see
“Configuring 802.11g Radio Advanced Parameters” on page 106.
4. (Master only) Configure inbound filters. For help, see “Configuring
802.11g Radio Inbound Filters” on page 108.
5. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 45.
6. (Optional) Configure security by clicking Configure security settings for
this service set. For help, see Chapter 6, “Configuring Security” on
page 171.