beautypg.com

Set mgmtacl state – Allied Telesis AT-S62 User Manual

Page 562

background image

Chapter 39: Management ACL Commands

562

SET MGMTACL STATE

Syntax

set mgmtacl state=disable|enable

Parameters

state

Sets the state of the Management ACL. The options are:

enable

Enables the Management ACL.

disable

Disables the Management ACL. This is the

default setting.

Description

This command enables or disables the Management ACL. This command
is equivalent to the ENABLE MGMTACL and DISABLE MGMTACL
commands.

Note

Activating the Management ACL without entering any access
control entries (ACEs) prohibits you from remotely managing the
switch from a Telnet or web browser management session.

Example

The following command enables the Management ACL:

set mgmtacl state=enable

See also other documents in the category Allied Telesis Computer hardware: