Allied Telesis AT-S62 - Manual (Page 252)

Chapter 16: File Download and Upload Commands
252
The following command uploads the configuration file
“sales_switches.cfg” from a master switch to switch 4:
upload method=remoteswitch
srcfile=sales_switches.cfg switchlist=4
After the switch receives the file, it marks the file as its active boot
configuration file and automatically resets itself so that it starts running
with the new settings.
Since the configuration file was designated by its filename, the entire file
without modifications is uploaded. This type of configuration file upload
should be performed with care. If the master switch has a manually
assigned IP address, the switch receiving the configuration file will end
up with the same IP address as the master switch.