Allied Telesis AT-S62 - Manual (Page 443)

AT-S62 Command Line User’s Guide
443
SET SWITCH INFILTERING
Syntax
set switch infiltering=yes|no|on|off|true|false
Parameters
infiltering Specifies the operating status of ingress filtering. The
options are:
yes, on, true Activates ingress filtering. The
values are equivalent. This is the
default.
no, off, false Deactivates ingress filtering. The
values are equivalent.
Description
This command controls the status of ingress filtering. When ingress
filtering is activated, which is the default, tagged frames are filtered
when they are received on a port. When ingress filtering is deactivated,
tagged frames are filtered before they are transmitted out a port. To
view the current setting, use the SHOW SWITCH on page 68. For further
information on ingress filtering, refer to the AT-S62 Management
Software Menus Interface User’s Guide.
Example
The following command deactivates ingress filtering:
set switch infiltering=off