Allied Telesis AT-S62 - Manual (Page 393)

AT-S62 Command Line User’s Guide
393
ACTIVATE RSTP
Syntax
activate rstp
Parameters
None.
Description
Use this command to designate RSTP as the active spanning tree on the
switch. Once you have selected RSTP, you can enable or disable it using
the ENABLE RSTP and DISABLE RSTP commands. RSTP is active on a
switch only after you have designated it as the active spanning tree with
this command and enabled it with the ENABLE RSTP command.
Only one spanning tree protocol, STP, RSTP, or MSTP, can be active on
the switch at a time.
Example
The following command designates RSTP as the active spanning tree:
activate rstp