Allied Telesis AT-S62 - Manual (Page 357)

AT-S62 Command Line User’s Guide
357
SHOW POE STATUS
Syntax
show poe status [port=port]
Parameter
port Specifies a port. You can specify more than one port at
a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
Entering this command without specifying a port displays the following
PoE information:
❑ Max Available Power - The total available power for PoE supplied
by the switch. This value is 400 W for the AT-8524POE switch.
❑ Consumed Power - The amount of power being used by the
powered devices.
❑ Available Power - The amount of power available for additional
powered devices.
❑ Power Usage - The amount of power currently consumed by the
powered devices connected to the switch. The value is give as a
percentage of the total amount of power available.
❑ Min Shutdown Voltage - The minimum threshold voltage at which
the switch shuts down PoE. If the power supply in the switch
experiences a problem and the output voltage drops below this
value, the switch shuts down PoE on all ports. This value is not
adjustable.
❑ Max Shutdown Voltage - The maximum threshold voltage at
which the switch shuts down PoE. If the power supply in the
switch experiences a problem and the output voltage exceeds
this value, the switch shuts down PoE on all ports. This value is not
adjustable.
❑ Summary of port status