Allied Telesis AT-S62 - Manual (Page 457)

AT-S62 Command Line User’s Guide
457
SHOW GARP COUNTER
Syntax
show garp=gvrp counter
Parameter
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S62
management software is GVRP.
Description
This command displays the current values for the following GARP packet
and message counters:
❑ GARP application
❑ Receive: Total GARP Packets
❑ Transmit: Total GARP Packets
❑ Receive: Invalid GARP Packets
❑ Receive Discarded: GARP Disabled
❑ Receive DIscarded: Port Not Listening
❑ Transmit Discarded: Port Not Sending
❑ Receive Discarded: Invalid Port
❑ Receive Discarded: Invalid Protocol
❑ Receive Discarded: Invalid Format
❑ Receive Discarded: Database Full
❑ Receive GARP Messages: LeaveAll
❑ Transmit GARP Messages: LeaveAll
❑ Receive GARP Messages: JoinEmpty
❑ Transmit GARP Messages: JoinEmpty
❑ Receive GARP Messages: JoinIn
❑ Transmit GARP Messages: JoinIn
❑ Receive GARP Messages: LeaveEmpty