Allied Telesis AT-S62 - Manual (Page 133)

AT-S62 Command Line User’s Guide
133
SET SNMPV3 ACCESS
set snmpv3 access=access
[securitymodel=v1|v2c|v3]
[securitylevel=noauthentication|authentication|
privacy] readview=readview writeview=writeview
notifyview=notifyview
[storagetype=volatile|nonvolatile]
Parameters
access Specifies the name of the group, up to 32
alphanumeric characters.
securitymodel Specifies the security model. Options are:
v1 Associates the Security Name, or User Name,
with the SNMPv1 protocol.
v2c Associates the Security Name, or User Name,
with the SNMPv2c protocol.
v3 Associates the Security Name, or User Name,
with the SNMPv3 protocol.
securitylevel Specifies the security level. The options are:
noauthentication This option provides no
authentication protocol and no
privacy protocol.
authentication This option provides an
authentication protocol, but no
privacy protocol.
privacy This option provides an
authentication protocol and the
privacy protocol.
readview Specifies a Read View Name that allows the users
assigned to this Group Name to view the information
specified by the View Table entry.
writeview Specifies a Write View Name that allows the users
assigned to this Security Group to write, or modify, the
information in the specified View Table.
notifyview Specifies a Notify View Name that allows the users
assigned to this Group Name to send traps permitted
in the specified View.