Allied Telesis AT-S62 - Manual (Page 112)

Chapter 7: SNMPv3 Commands
112
CREATE SNMPV3 COMMUNITY
Syntax
create snmpv3 community index=index
communityname=communityname
securityname=securityname
transporttag=transporttag
[storagetype=volatile|nonvolatile]
Parameters
index Specifies the name of this SNMPv3 Community Table
entry, up to 32 alphanumeric characters.
communityname Specifies a password for this community entry, up to
32 alphanumeric characters.
securityname Specifies the name of an SNMPv1 and SNMPv2 user,
up to 32 alphanumeric characters.
transporttag Specifies the transport tag, up to 32 alphanumeric
characters. This is an optional parameter.
storagetype Specifies the storage type of this table entry. This is an
optional parameter. The options are:
volatile Does not allow you to save the table
entry to the configuration file on the
switch. This is the default.
nonvolatile Allows you to save the table entry to
the configuration file on the switch.
Description
This command creates an SNMPv3 Community Table entry.
Examples
The following command creates an SNMP community with an index of
1213 and a community name of “sunnyvale145.” The user is “chitra34”
and the transport tag is “testengtag.” The storage type for this
community is nonvolatile storage.
create snmpv3 community index=1213
communityname=sunnyvale145 securityname=chitra34
transporttag=testengtag storagetype=nonvolatile