Allied Telesis AT-S62 - Manual (Page 281)

AT-S62 Command Line User’s Guide
281
The SEVERITY parameter displays entries of a particular severity. Table 5
defines the different severity levels. You can specify more than one
severity level at a time. The default is error, warning, and informational
messages.
Table 5 Event Log Severity Levels
An example of the event log is shown in Figure 1. The example uses the
full display mode.
Figure 1 Event Log Example
Value Severity Level Description
ALL - Selects all severity levels.
E Error Switch operation is severely impaired.
W Warning An issue may require manager attention.
I Informational Useful information that can be ignored
during normal operation.
D Debug Messages intended for technical support
and software development.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2004
Event Log
S Date Time EventID Source File:Line Number
Event
-----------------------------------------------------------
I
2/01/04 09:11:02 073001 garpmain.c:259
garp: GARP initialized
I 2/01/04 09:55:15 083001 portconfig.c:961
pcfg: PortConfig initialized
I 2/01/04 10:22:11 063001 vlanapp.c:444
vlan: VLAN initialization succeeded
I 2/01/04 12:24:12 093001 mirrorapp.c:158
pmirr: Mirror initialization succeeded
I 2/01/04 12:47:08 043016 macapp.c:1431
mac: Delete Dynamic MAC by Port[2] succeeded
Temporary (Memory) Log Events 1 - 5 of 212
P - Previous Page N - Next Page F - First Page L - Last Page
R - Return to Previous Menu