Allied Telesis AT-S62 - Manual (Page 493)

AT-S62 Command Line User’s Guide
493
SHOW PORTACCESS|PORTAUTH
Syntax
show portaccess|portauth config|status
Note
The PORTACCESS and PORTAUTH keywords are equivalent.
Parameters
config Displays whether port-based access control is
enabled or disabled on the switch.
status Displays the role and status of each port.
Description
Use this command to display operating information for port-based
access control.
The CONFIG parameter displays:
❑ Enabled or disabled status of port-based access control
❑ Authentication method
The STATUS parameter displays the following information for each port:
❑ Port role
❑ Status
Examples
The following command displays whether port-based access control is
enabled or disabled on the switch:
show portaccess config
This command displays the role and status for each port:
show portaccess status