Allied Telesis AT-S62 - Manual (Page 190)

Chapter 10: Port Trunking Commands
190
DELETE SWITCH TRUNK
Syntax
delete switch trunk=name port=port
Parameters
trunk Specifies the name of the trunk to be modified.
port Specifies the port to be removed from the existing
port trunk. You can specify more than one port at a
time.
Description
This command removes ports from a port trunk. To view the trunks on a
switch, refer to SHOW SWITCH TRUNK on page 193. To completely
remove a port trunk from a switch, see DESTROY SWITCH TRUNK on
page 191.
Caution
Disconnect all data cables from the ports of the trunk on the switch
before using this command. Removing a port from a port trunk
without first disconnecting the cables may result in loops in your
network topology, which can produce broadcast storms and poor
network performance.
Example
The following command removes port 9 from a port trunk called
Dev_trunk:
delete switch trunk=Dev_trunk port=9