Allied Telesis AT-S62 - Manual (Page 479)

479
Chapter 32
802.1x Port-based Access Control
Commands
This chapter contains the following commands:
❑ DISABLE PORTACCESS|PORTAUTH on page 480
❑ DISABLE RADIUSACCOUNTING on page 481
❑ ENABLE PORTACCESS|PORTAUTH on page 482
❑ ENABLE RADIUSACCOUNTING on page 483
❑ SET PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR on
page 484
❑ SET PORTACCESS|PORTAUTH PORT ROLE=SUPPLICANT on page
489
❑ SET RADIUSACCOUNTING on page 491
❑ SHOW PORTACCESS|PORTAUTH on page 493
❑ SHOW PORTACCESS|PORAUTH PORT on page 494
❑ SHOW RADIUSACCOUNTING on page 495
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software Menus Interface User’s
Guide for background information on 802.1x port-based access
control.