Allied Telesis AT-S62 - Manual (Page 155)

AT-S62 Command Line User’s Guide
155
SHOW SNMPV3 USER
Syntax
show snmpv3 user=user
Parameters
user Specifies the name of an SNMPv3 user, up to 32
alphanumeric characters.
Description
This command displays SNMPv3 User Table entries. You can display one
or all of the table entries.
Examples
The following example displays the SNMPv3 User Table entry for a user
name of Robert:
show snmpv3 user=Robert
The following example displays all of the SNMPv3 User Table entries:
show snmpv3 user