Allied Telesis AT-S62 - Manual (Page 267)

AT-S62 Command Line User’s Guide
267
DISABLE LOG
Syntax
disable log
Parameters
None.
Description
This command disables the event log module. When the log is disabled,
the AT-S62 management software stops storing events in the log and
sending events to the syslog servers. The default setting for the event
log is enabled.
Note
The event log, even when disabled, logs all AT-S62 initialization
events that occur when the switch is reset or power cycled. Any
switch events that occur after AT-S62 initialization are recorded only
if the event log is enabled.
Examples
The following command disables the event log on the switch:
disable log