Allied Telesis AT-S62 - Manual (Page 27)

AT-S62 Command Line User’s Guide
27
SET PROMPT
Syntax
set prompt=”prompt”
Parameter
prompt Specifies the command line prompt. The prompt can
be from one to 12 alphanumeric characters. Spaces
and special characters are allowed. The prompt must
be enclosed in double quotes.
Description
This command changes the command line prompt. Assigning each
switch a different command line prompt can make it easier for you to
identify the different switches in your network when you manage them.
If you define the system name before you set the command line prompt,
the switch uses the system name as the prompt. To set the system name,
refer to SET SYSTEM on page 61.
Example
The following command changes the command line prompt to “Sales
Switch”:
set prompt=”Sales Switch”